The number of roots can be calculated according to the area, the number of stools = the area of ​​the board / the horizontal spacing of the stools * the vertical spacing. If the ribs are designed in the form of bottom ribs and support negative ribs, and there are no temperature ribs, then the number of stools The hollow part must be deducted. The beam can play the role of a stool, so the number of stools should be buckled. There is no need to calculate the number of benches, stairwells, and slabs in the elevator shaft, stairs, and slabs.
2. How to calculate the length of horse stools?
Horse stool height = plate thickness - 2* protective layer - Σ (the sum of the reinforcing bar diameter of the upper plate ribs and the bottom plate of the plate).
The upper straight section is the plate spacing + 50mm (it can also be 80mm, put an upper reinforcement on the horse bench), the lower left straight section is the plate spacing + 50mm, the lower right straight section is 100, so that the horse stool Two reinforcements can be placed in the upper part, and the lower three points are smoothly supported on the lower reinforcement of the panel. Horseshoe ribs cannot contact the stencil to prevent back rust on the squat ribs.
3, horse bench ribs specifications:
When the board thickness is ≤140mm, the stress bearing ribs and distribution ribs of the board ≤10, when the bench rib diameter can be used ф8; when 140mm
Hebei Cangzhou Jintongcheng Machinery Co., Ltd. is a professional manufacturer of fully automatic horse bench machine, three-level steel bar straightening machine, cold rolled ribbed steel bar machine, fully automatic steel bar bending machine, steel wire drawing machine, take-up machine, steel bar welding machine, Welded wire mesh machine, pipe straightening machine, steel rolling machine, reinforced wire rolling machine. Equipment warranty for one year, the entire tracking service independent research and development design and production, products throughout the country and more than 20 countries and regions in the world, choose the public extension machinery to protect you worry-free, the same with the original adult gold and you to create brilliant! Look for information and purchase!
MONEL®
The registered trademark name, Monel, is applied as the prefix name to several corrosion resistant alloys produced by Special Metals Corporation. These alloys are nickel-based and exhibit traits that include high resistance to atmospheric corrosion, salt water, and various acid and alkaline solutions.
Alloys of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Monel® brand alloys.
The corrosion-resistant alloy is widely used in the marine, oil and chemical processing industries.
Monel Availability
Mega Mex supplies Monel 400, K-500 & R-405. Most of these grades are available in the form of plate, sheet, pipe, tubing, fittings, bar, wire and rod.
What are the Characteristics of Monel ?
Good resistance to acids such as hydrofluoric and sulfuric acid
Highly resistant to alkalis
Malleable
Highly corrosion resistant
Stronger than steel
In what Applications are Monel alloys used ?
Pump shafts, oil-well tools, instruments, doctor blades and scrapers, springs, valve trim, fasteners, marine propeller shafts
Marine components
Chemical and hydrocarbon processing equipment
Valves, pumps, shafts, fittings, heat exchangers
Monel Trivia
Monel was discovered by Robert Crooks Stanley who worked for the International Nickel Company in 1901. The new alloy was named in honor of the president of the company, Ambrose Monell.
*Monel® is a registered trademark of Special Metals Corporation group of Companies.
Monel Steel Tube,Monel Tube,Nickel Alloy Monel Tube
YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com