1 Let go of the cooling water in the engine.
2 Change the engine oil. The new engine oil is usually neutral and will not corrode the metal parts of the engine.
3 Fill the fuel tank with diesel fuel to avoid rusting the fuel tank. Add preservatives if possible.
4 During the shutdown period, the engine should be started once a month to make the machine run at a short distance, so that a new oil film can be established at the lubrication part of each part to prevent rust. It should be noted that the cooling water should be filled before starting, and the cooling should be exhausted when finished. water.
2. Rebar bending machine should be parked in a dry room. If you have to park outdoors, you should choose a flat floor and put it on a wooden board. After parking, cover it with a cover cloth.
3, before long-term storage, the machinery must be maintained, repair damaged parts, and its thorough clean-up to maintain a good technical condition.
4. Arrangement and arrangement of the parking airport should ensure that the access of any machine is not affected by other machinery.
5. The mechanical fuel lever should be placed in the idle position, and the joysticks should be placed in the neutral position.
2 Change the engine oil. The new engine oil is usually neutral and will not corrode the metal parts of the engine.
3 Fill the fuel tank with diesel fuel to avoid rusting the fuel tank. Add preservatives if possible.
4 During the shutdown period, the engine should be started once a month to make the machine run at a short distance, so that a new oil film can be established at the lubrication part of each part to prevent rust. It should be noted that the cooling water should be filled before starting, and the cooling should be exhausted when finished. water.
2. Rebar bending machine should be parked in a dry room. If you have to park outdoors, you should choose a flat floor and put it on a wooden board. After parking, cover it with a cover cloth.
3, before long-term storage, the machinery must be maintained, repair damaged parts, and its thorough clean-up to maintain a good technical condition.
4. Arrangement and arrangement of the parking airport should ensure that the access of any machine is not affected by other machinery.
5. The mechanical fuel lever should be placed in the idle position, and the joysticks should be placed in the neutral position.
Galvanized Wire For Construction,Low Carton Galvanized Wire For Construction,High Quality Low Carton Galvanized Wire,Galvanized Wires For Construction
Anping Deming Metal Net Co.,Ltd , https://www.wovenfence.nl