ISO/IEC Guide 25-1990 "General Requirements for the Technical Capabilities of Calibration and Inspection Laboratory" defines "certification" as:
The evidence is provided by verification to confirm compliance with the requirements (ISO 84O2/DADI-3.37, with additional notes added for the purposes of this guide).
Note:
1. In order to interface with the management of the measuring instrument, the purpose of the verification is to verify the deviation between the indication value of the measuring instrument and the corresponding known quantity, so that it is always smaller than the standard, procedure or specification for the management of the measuring instrument. The maximum allowable error specified.
2. A decision to continue using, investigating, repairing, downgrading, or declaring a meter based on the results of the verification. In any case, when the verification is completed, the verification shall be recorded on the special record of the measuring instrument.
The definition given by the International Metrology Organization for the verification is:
A procedure for ascertaining and confirming the compliance of a measuring instrument with statutory requirements, which includes inspection, marking and/or issuing a certificate of verification. â€
ISO1OO12—1 “Quality Assurance Requirements for Measurement and Testing Equipment†standard defines “calibration†as:
A set of operations for determining the relationship between the indication of the meter or measurement system or the value represented by the physical gauge or standard substance and the corresponding measured known value under specified conditions.
Note:
1. Calibration results can be used to assess the indication error of a meter, measurement system or physical gauge, or to assign a value to a marker on any scale;
2. Calibration can also be used to determine other metering characteristics;
3. The calibration results can be recorded on a document sometimes called a calibration certificate or calibration report;
4 Sometimes the approval result is expressed as a correction value, calibration factor or calibration curve.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
This is a 4 burners with cast iron pan suppport . The surface material is stainless steel cast stove .
It is very easy to clear it and tidy for this kind of home kitchen GAS STOVE . we had big supplier for this kind of Stainless Steel Gas Stove . Since we had more than 20 years fo this kind of kitchen Gas Stove . We are the leading manufacturers .hope we can work with each for this kind of it .
Stainless Steel Electric Stove,Gas Stove,Kitchen Gas Stoves,Stainless Steel Gas Stove,this is our main products .welcome to order it .
GAS STOVE
Stainless Steel Electric Stove,Gas Stove,Kitchen Gas Stoves,Stainless Steel Gas Stove
GUANGZHOU AIJINGSI TRADING LIMITED , https://www.aichugashob.com