Selection of hydraulic lifts

(1) Determining the load: According to the required lifting force, transmission speed and installation position, the appropriate hydraulic lift freight elevator model and speed ratio are initially selected, and the matching drive motor is initially selected to determine the installation size and spatial position of the entire system. Selection of hydraulic lifts (1) Determining the load: According to the required lifting force, transmission speed and installation position, initially select the appropriate hydraulic lift freight elevator model and speed ratio, and initially select the matching drive motor to determine the installation of the entire system. Size and spatial location.

(2) Determine the working direction: Determine the rotation direction of the input shaft (worm) according to the required working direction of the output shaft. The direction of rotation of the worm and the direction of expansion and contraction of the lifting screw are similar to the relationship between the gear and the rack. If multiple elevators are used together, it is also necessary to pay attention to the direction of rotation of the commutator.

(3) Determining the stroke: After the initial stroke of the lift according to the working stroke, check the critical bending force of the push rod according to the parameters provided by the lift manufacturer. If the pressure is too large, the lead screw size needs to be increased. The usual practice is to increase the lift. The parameter specifications (the screw is increased) can also increase the screw parameter specification only when the elevator load is sufficient.

(4) Determine the working speed: According to the working cycle and load characteristics of the elevator and the elevator parameters provided by the manufacturer, check the maximum allowable speed. If the speed is too high, you need to select the elevator with large parameter specifications. When the elevator load is sufficient. Next, it is also possible to increase only the lead of the lead screw.







Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Ground And Polished Steel Bar is produced by grinding and polishing after peeling, turning or cold drawing steel bar. Our advantages and more services of ground and Polished Steel Bar includes:

1) Wide range of diameters from 20mm to 150mm

2) Customized Length from 100mm to 12000mm

3) Good surface roughness: 0.4um to 0.6um

4) Good straightness: 0.5mm/m to 1mm/m

5) Good roundness: 80% of diameter tolerance

6) Diameter tolerance: -0.02mm to -0.06mm

7) Matched further processing: Grinding, polishing, straightening

8) Anti-rusty package

9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

10) Fast delivery time

Ground And Polished Steel Bar

4140 Ground Bar,Polished Steel Bar,Polished Steel Rod,Centreless Ground Bar

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.lerenspecialsteel.com