Many people use safe deposit boxes and safes to meet some difficult problems. What should we do? We have summarized some of the consumer's difficult problems, and made some adjustments for everyone's reference, so that everyone can solve related problems. Problems can also save you a lot of trouble.
What if the newly purchased safe does not open? If you bought a new electronic lock safe, then generally it will have four or five keys. There will be two outside, there will be a manual, which will put two. To put the two outside the instructions according to the instructions, generally put the big in the big key hole, and then put the small under the battery box, and then rotate the two at the same time, must follow the instructions on the procedure.
Why does the purchased safe allow the key to be inserted in, or turn it up, but it cannot be opened? This is because the new box may be used to protect the paint. Usually a blanket will be placed in the lower left corner when turning the key. The carpet should be pulled out so that the safe can be opened.
How can we make the password change? In the safe, there will usually be a button change button. At this time, just press the button to see the green light, you can enter a new password, and then press the relevant button to turn on the green light Off, so you just changed the password.
After the battery is replaced with a new one, there are two reasons for this phenomenon: one is because the battery used is not enough, so even if it is replaced, it is useless. If this is the problem, So just replace a new battery. The other reason is that after inserting the key, you must first turn to the right before you press the password, so that you will not be able to turn the door. Just by following the correct method, you can enter the password and open the safe.
Want to learn more about the knowledge of the safe, all in the Chinese safe exchange network.
Self-Priming Pump(CIP Pump)
Self-Priming Pump is a hygienic side-channel design sanitary pump, it is applicable by food processing, biopharm and chemical industries. Self-priming pump is specially designed for pumping materials what containing air or gas, and it can be also be used for negative suction with prior priming as well as with filtration equipment. Kaysen self-primping pump, Hygenic Self-Priming Pumps, Self-Priming Pumps, Cip Self-Priming Pump can be used for wine, fine oil, syrups, volatile products such as alcohol, acetone and other solvents, or other materials which temperature close to boiling point. However, the mainly using field of self-priming pump is for CIP returning.
Materials
Wetted parts: AISI 316/304
Other parts: AISI 304
Gaskets (standard): EPDM(FDA)
Mechanical sealing(standard): C/SiC/EPDM
Internal surface finish: Polished
External surface finish: Sand-blasting
Technical specifications
Max. flow : 30m³/h 132GPm
Max. head : 30H(M)
Max. pressure : 3Bar/43PSI
Max. operating temp. : 120°C/248°F
Max. revolving speed. : 1750 min
Max. suction head : 8m/22ft
Options
Mechanical sealing in SiC/SiC
Gaskets in FPM(Viton) and PTFE
Inlet&Outlet Connection: Tri-Clamp, Threaded, Flanged to DIN, SMS, 3A, RJT e
Hygienic Self-Priming Pumps,Self-Priming Pumps,Cip Self-Priming Pump
Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com