Now people will decorate the bathroom will be added to the bathroom dry and wet area partition, not only play a role in separating the bathroom dry and wet space, but also make the bathroom look high-grade appearance, but for most of the smaller area of ​​the bathroom, do the partition will make the space look Very cramped. How to design the partition style of the bathroom dry and wet areas ? Is it necessary to cut off the wet and dry areas in the bathroom ?
Must the toilet be separated from the wet and dry areas?
The wet and dry areas cut off the more popular concepts in current bathroom design. In traditional bathroom renovations, there is seldom a clear distinction between dry areas and wet areas. Therefore, after a shower or after cleaning, the whole bathroom is full of water vapor. In fact, this is not good. If wet air is trapped in the bathroom for a long time, it will cause indoor air pollution. In particular, some bathrooms with wooden bathroom cabinets, if not wet and dry areas cut off, in a humid room for a long time, the cabinet is easy to damp, breeding bacteria.
However, the biggest limitation of making partitions in the wet and dry areas of the bathroom is that not all types of units are suitable. First of all, the wet and dry areas cut off the area of ​​the larger requirements, the bathroom plus a washbasin's area of ​​at least 8m2, start off the partition will not feel crowded, do not work smoothly.
On the other hand, if the new house is suitable for dry and wet areas, second-hand housing is not recommended. Some houses can be reluctantly changed though they can be changed. However, the amount of work is relatively large, and the partitions are all part of the cost of individual construction. Together with some of the decorative components that may be used, the second-hand housing is used as a partition for the bathroom dry and wet areas. The cost is still relatively high.
Dry and wet partition material
There are many kinds of partition materials for bathroom, and for the selection of wet and dry partition materials in the bathroom, it is recommended to use tempered glass. The partition effect of glass material will not make the overall space of the bathroom visually narrow, so the bathroom can use glass as a dry and wet partition. Material partition material.
How to design the partition style of the bathroom wet and dry areas, Xiao Yang furniture Xiaobian finishing some programs:
1. Shower curtain partition
The shower curtain is the lowest cost and most convenient type of wet/dry partitioning method. It is only necessary to install the shower curtain rod in a fixed position, and then put on the shower curtain to pull it apart when it is not in use. If the bathroom area is small and you want to do a simple dry separation, you can choose the shower curtain. However, the disadvantage of this method is very obvious, that is, can only cover the splash of water when the bath, the following will still run water.
2. Floor drag door partition
Install a sliding door in the bathing area, separating the shower area from the sink and toilet area. In this way, the overall space requirement for the bathroom is relatively large, and the isolation effect is relatively good.
3. Wall corner glass partition
This is also a direct landing, but relying on the position of the corner, with a few glasses for dry and wet separation, the requirements of the space than the sliding door type is smaller.
4. Shower room partition
The shower room is generally of a fixed size and is a single unit that can be placed directly in the bathroom.
5. Wall partition
This method is completely dry and wet separation, if the room structure is allowed to be considered, if there is no such space does not have to deliberately wall separation.
The above is the whole content of how to design the partition style of the bathroom dry and wet areas . To learn more about home, you can pay attention to the GO Home Information Channel.
related articles
What are the advantages of bathroom bathroom cabinet
How practical is the bathroom glass partition? What is the price of bathroom glass partitions?
1.Specification: Various size as
customer's requirements
2.Material:A6063,A6061,A3003 and other series alu
alloy
3.Suface treatment: anodizing ,polishing,turning ,power coating,mill finish etc
4.Design:OEM,ODM,or design by ourselves
5.Equipment: CNC ,extruding machine,cold drawn machine,heating
oven,straigtening machine,cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
6. STANDARD PACKING :Wooden case/carton
7. OPTIONAL PACKING: Polyfoam interleave inside, wooden case
Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at
sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus
7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Aluminum Alloy Extrusion Tube
Aluminum Alloy Extrusion Tube,Aluminum Extrusion Tube,Aluminium Extrusion Tube,Aluminium Alloy Extrusion Tube
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com