High-speed machining places high demands on the balance performance of the tool components. The so-called tool assembly includes the tool and the tool holder. First, any rotating body is subjected to the centrifugal force during the rotation process. F=mrω~2. In the formula, m represents the mass of the rotating body, r represents the distance between the center of gravity and the axis, and ω represents the angular velocity. If the rotating body is completely in equilibrium, that is, the center of gravity coincides with the axis, it can be regarded as the centrifugal force F=0. If the rotating body is in a non-equilibrium state, that is, when the center of gravity is different from the axis, then the rotating body will be subjected to a large centrifugal force at high speed (see Figure 1). Therefore, if the tool is in this situation, the performance of the tool will be significantly reduced, the tool bar will bend and vibrate, and excessive vibration will cause radial runout problems, thus shortening the knife.
1. Water Filter for installation in front of water treatment equipment or in front of water heater, washing machine, shower equipment, etc.
2.Water filter can play the role of coarse filter and eliminate the residual chlorine in the water, extend back water purification equipment and water heater service life.
3.High flow filter bottle is designed to handle the general using water for your family.
4.Installed on the tower exit or tap water inlet that can check your domestic water using.
Water Filter
Water Filter,Inlet Water Filter,Outlet Water Filter ,Pressure Washer Water Inlet Filter
Qingdao Hong Lang Mechanical Equipment Co.,Ltd ,