problem
Pneumatic tools have many advantages and are widely used in assembly plants such as automobile manufacturers and electrical factories.
After using the pneumatic tools in the assembly workshop of a large automobile manufacturing plant in the west for a period of time, the internal pump shaft and blades are easy to absorb dust and impurities, causing the power to drop and affect the working efficiency.
The maintenance personnel of the factory need to disassemble the pneumatic tools basically every two weeks, clean the internal parts with kerosene, and then assemble them. How to reduce the wear of pneumatic tools and reduce the amount of maintenance?
solution
WD-40 solution free maintenance pneumatic tools
WD-40 solution has strong penetrating power and strong surface affinity with metal. It can effectively remove oil, impurities and moisture attached to metal surface, and leave a dense anti-rust lubrication protective film to protect internal parts from lubrication. Sticky gray. Reduce the wear and failure of internal parts, and the noise of pneumatic tools is also reduced.
The pneumatic tools cleaned with WD-40 products are very clean and lubricated. They are cleaner than kerosene after disassembly, and they are lubricated by WD-40, which eliminates moisture and lubricates all friction pairs. The utility model makes the pneumatic tool use less noise, and rarely fails in the work, which greatly prolongs the maintenance period and the service life.
income
1. WD-40 products are free to disassemble and maintain pneumatic tools, which are simple, practical and efficient, reduce the failure of pneumatic tools, save working time and improve work efficiency. And reduce the amount of maintenance work.
2, WD-40 ingredients are safe and environmentally friendly, inherently biodegradable and safe to use. While kerosene is volatile, long-term use of kerosene is not good for the human body.
Due to the excellent performance of WD-40 products, the automobile manufacturer has fully promoted the use of WD-40 products. By 2012, the factory has been using WD-40 products for 10 years and achieved good results.
Concerned about surprises
Tagged with: pneumatic tools, internal friction, friction pair, maintenance products
Previous: Application of WD-40 in mold maintenance Next: Spring machine creates the charm of spring
Ferrosilicon is an iron alloy composed of iron and silicon. Ferrosilicon is an iron-silicon alloy made from coke, steel shavings, quartz (or silica) and smelted in an electric furnace. Since silicon and oxygen can be easily synthesized into silica, ferrosilicon is often used as a deoxidizer in steelmaking, and since SiO2 generates a large amount of heat during deoxidization, it is also advantageous to increase the temperature of molten steel. At the same time, ferrosilicon can also be used as an alloying element additive, widely used in low-alloy structural steels, spring steels, bearing steels, heat-resistant steels, and electrical silicon steels. Ferrosilicon is often used as a reducing agent in ferroalloy production and chemical industries.
Ferro Silicon
Ferro Silicon,Silicon Ferro Powder,High Quality Ferro Silicon,Nebulization Ferro Silicon
Hwa Seng Resources (Hong Kong) Co., Limited , http://www.hwaseng-resources.com