The flow of the liquid filling machine is generally as follows: the boxes with empty bottles are stacked on the tray, and the conveyor belt is sent to the unloading tray machine, the trays are unloaded one by one, and the boxes are sent to the unloading machine with the conveyor belt, and the empty bottles are removed from the conveyor. The box is taken out, and the empty box is sent to the washing machine through the conveyor belt, cleaned, and then transported to the side of the boxer to fill the bottle containing the beverage. The empty bottle taken out from the unloader is sent to the bottle washer for disinfection and cleaning by another conveyor belt. It is inspected by the bottle inspection machine and enters the filling machine and the capping machine after meeting the cleaning standards. The beverage is filled into the bottle by a filling machine. The bottle with the beverage is sealed by the capping machine and transported to the labeling machine for labeling. After the label is attached, it is sent to the packing machine and then sent to the stacking tray machine and stacked on the tray to be sent to the warehouse.
First, use, maintenance and installation
1. Because the filling machine is an automatic machine, the size of the easy-open bottle, bottle mat and cap are required to be uniform.
2. Before driving, you must first use the rocker to turn the machine to see if it is abnormal. It is true that you can drive again.
3. When adjusting the machine, the tool should be used properly. It is strictly forbidden to use excessive tools or excessive force to remove the parts to avoid damage to the machine or affect the performance of the machine.
4. When the machine is adjusted, be sure to tighten the loose screws. Rotate the machine with the rocker to see if the motion meets the requirements before driving.
5. The machine must be kept clean. It is strictly forbidden to have oil, liquid or glass debris on the machine to avoid damage to the machine. Therefore, it must:
(1) The machine removes the liquid or glass debris in time during the production process.
(2) Clean all parts of the machine surface before shifting, and add clean lubricating oil to each activity department.
(3) It should be scrubbed once a week, especially in places that are not easily cleaned in normal use or blown off with compressed air.
Second, the installation notes
1. After the machine is out of the box, first check whether the random technical data is complete, and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feeding assembly and the discharging assembly according to the outline drawing in this manual.
3. Add new lubricant to each lubrication point.
4. Turn the machine with the rocker to check if the machine is running in the right direction (counterclockwise in the direction of the motor shaft). The machine must be protected from grounding.
Third, working principle and performance
1. Working principle: DY series filling machine is a semi-automatic piston filling machine. The cylinder is driven by a cylinder to extract and discharge materials. The check valve is used to control the flow of material, and the reed switch is used to control the stroke of the cylinder to adjust the filling amount.
2. Performance: The semi-automatic piston type single-head liquid filling machine produced by our company is based on the series of filling machines produced by our company. It introduces foreign advanced filling machine technology and carries out further transformation and innovation. Its structure is more Simple and reasonable, with high precision and easy operation, it is an ideal choice for your company to fill the high-tech.
Mosquito Coil,Insect Killer,Mosquito Repeller
Pest Control Insecticide,Electrical Products Co., Ltd. , http://www.nsmosquitos.com