Conveyor belt joint method
Review
All conveyor belts must be connected in a ring shape to be used, so the quality of the conveyor belt joints directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly. Common methods for conveyor belt joints include mechanical joints, cold bonded joints, and hot vulcanized joints. Welcome to inquire - Anping Yabei 18833272313
Mechanical joint method
Generally speaking, the belt buckle joint is used. This joint method is convenient and convenient, and economical, but the joint has low efficiency and is easy to be damaged, which has a certain influence on the service life of the conveyor belt product. In the PVC and PVG whole core flame retardant antistatic conveyor belt joints, the product is generally used in products with 8 or less belts. Welcome to inquire - Anping Yabei 18833272313
Cold bonding head method
1. Stick a few strips on the back side of the glued surface; when peeling off the joint part, stick the four to six strips on the back side of the glued surface of the joint before you want to make the glued surface. When the adhesive is officially bonded, the person can use the rubber strip to sew the seam, which can avoid contamination of the glue on the glue surface, can reduce the problem of staining the glued rubber surface, and reduce the probability of occurrence of glue on both sides of the joint.
2. Put a new plastic cloth between the two glued surfaces. Before sewing the glued joints, cover the lower joint with a brand new clean folded plastic sheet. Then, light the joints above. The light cover is applied to the seam on the plastic sheet. When the seam is finished, the plastic sheet is slowly removed from the end of the tilt joint. This method solves the problem of difficulty in seaming and avoids contamination. The problem of the glued surface. In this process, we have to hold the hand or the wire pliers to pinch the two sides of the belt connector. Welcome to inquire - Anping Yabei 18833272313
Hot vulcanization joint method
Practice has proved to be the most ideal joint method, which can ensure high joint efficiency, is also very stable, and has a long joint life and is easy to grasp. However, there are disadvantages such as troublesome process, high cost, and long joint time. Welcome to inquire - Anping Yabei 18833272313
Five-star program, one-stop solution due to needs - Anping County Yabei Wire Mesh Products Co., Ltd. Workshop isolation network, fence mesh, barbed wire fence, fence network company http://
Chain Link Network http://
Highway fence network http://
Mobile: one eight seven three two seven seven two three one three
QQ: eight four six six two two six one
Zhongda has ISO 9001 qualification and
certified welding engineers to ensure the quality of the products. The factory
has single component lifting ability of 100 tone, and combined with the functions
of assembling, welding, testing, painting etc. All pressure components and storage tanks are 100% X-ray texted quality
control is carried out through all procedures. 
Steel Container,Steel Cage Container Pipe Tube,Steel Cargo Cage Container,Large Steel Container Pipe Tube
Zhongda Steel Structure , http://www.zhongdametal.com