Product Description
1.This hot air soldering gun is with thermostat temperature adjusting function, with overtemperature protection with result in convenient and save usage.
2.This heat gun is with imported motor and michrome wire as a result its working life is long and heating efficiency is hight.
3.This power tool hot air gun is with good quality heat insulation inside ensures longer using life of the heating filament.
Â
Hot Air Gun JF-2000W | |
Power Input | Available In 220V |
Temperature Range | 50-550 ºC |
Temperature stability | ±1ºC |
Noise | <0.2dB |
Power Consumption | 1600W |
Heating Element | Metal Heating Core |
Air Capacity | 190-350L/Min(max) |
Station Dimensions | 245H*200L(MM) |
Package Size | 280*250*80(mm) |
Gross Weight | 0.8 KG/Set |
Features
product description of digital hot air gun heat gun:
   • Import motor, high-performance, longer service life.
   • Imported biotite Ni-Cr alloy wire heating core, overheat protection device, rapid heating, power foot, long life.
   • Double vortex air outlet, soft wind does not damage the device.
   • Sensor closed loop, microcomputer zero trigger temperature control, temperature accuracy and stability.
   • Push-button thermostat 10 degrees a tune, the minimum temperature of 50 ° Maximum temperature of 550 °, the temperature can be adjusted within a wide range.
   • Three-speed electronic circuit to control air flow:190-350L/MIN
   • 20 seconds off delay, effectively extending the heater core life.
Application
1.Tin desolding ,thaw, depainting, plastic heating, lab vessel cleaning, liquid heat  ergy transfer, bond intenerating etc.
2.Various of nozzles and spare parts for choice;
3.Maximum power consumption reach 1600W,temperature 50-550°C,High efficiency and easy operating;
4.Temperature adjustable system.
Â
Adjustable Standard Bevel Shower Hinges
The Adjustable Standard Bevel Shower Hinges(Adjustable Pinnacle Hinges) have taken our popular Standard Bevel Shower Door Hinges(Pinnacle Hinges) to a new level. Adjustment to accommodate the desired angle (up to 90º) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired angle. The door can swing 90º inward and also 90º outward (adjusting angle from factory set position will reduce 90º swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5º inside the shower area, thus having the door close snugly against the jamb.
Finishes: Chrome, Brushed Nickel, Matte Black, ORB, PVD Gold, etc.
Glass Thickness: 5/16" to 1/2" (8 mm to 12 mm) Tempered Glass
Hinge Swings: Opening Inwards and Outwards
Closing Type: Self-Centering When Within 15°
[Mouse-ears" Glass Cut-Out
Material: Full Solid Brass
Using two hinges hold up to 80 lbs/36 kg. with a max. door width of 28"/711 mm
Using three hinges hold up to 120 lbs/54 kg. with a max. door width of 32"/813 mm
Wall Mount Hinge with Internal 5 Degree Pin is Available
Bevel Edges Shower Door Hinge,Adjustable Shower Door Hinge,Adjustable Standard Duty Shower Hinges,Adjustable Pinnacle Hinges
Prodiamonds Hardware Co., Ltd. , https://www.pdglasshardware.com