1. First, familiarize yourself with the drawings, understand the design intent, and provide technical disclosure to the construction team. Based on the clear design intent, the actual size of the site shall be measured according to the drawings. According to the requirements of the design and specifications, the operation steps shall be formulated for the details of the woodwork. In case of large size and drawing in and out, timely written notice shall be submitted to designers and supervisors.
2. Woodwork products must be manufactured strictly according to the dimensions indicated in the drawings. High-quality materials that have been dried or naturally dried must be used. Insects, loose, cracked or corroded woods must not be used.
3. All wooden works must be selected before use to ensure that the wood splint lines have the same color, and must ensure that the joints and installations in any place and anywhere will not damage its strength and the appearance of decorations, will not cause adjacent materials and structures. damage.
4. The surface of all wooden products should be planed and the cutting angle should be exactly flush. The joints and joints should be closely and neatly arranged, and the installation and pasting should be firm. The lines and corners should be clearly defined.
5, all wood production must be strictly in accordance with the design requirements, brushing fire retardant coatings and anti-corrosion treatment.
6. When veneer veneer is pasted on the surface of wooden board, it is first necessary to ensure that the veneer has uniform color and no knots. During the construction, ensure that the veneer is firmly affixed and the lines are consistent, the color is consistent with the woodwork, and the damaged veneer must not be constructed.
Second, no door wardrobe production:
1, wood board frame, back plate nine PCT board, such as the use of Boeing film first backplane Boeing film affixed before nailing, when the vertical board and cross-board stickers Boeing film to man-made outward mouth curling 3-4 Millimeters, and then use a small line of solid wood to suppress the mouth, to avoid the edge of Qiqiao. When working, pay attention to the sliding door to prevent the internal drawer from opening. (Note: The wardrobe interior can use Boeing film, mixed water paint, veneer, etc.);
2, the size of the drawer should be strictly in accordance with the size of the sliding door, the upper drawer and the drawer plate should be closed with a small solid wood (dry reduction process ibid), pants can not be higher than 1 meter;
3, the distance between the vertical boards can not exceed 1 meter, if more than 1 meter, it is necessary to add a vertical board, in order to avoid playing a long time pocket.
Villa design wardrobe brand paint decorative paint chest of drawers
Bridge Faucets,bridge kitchen faucet,Bridge Faucets price
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinfaucets.com