Model NO.: T5518
Trademark: Chinasky
Origin: China
HS Code: 820320
Model NO.: T5518
Trademark: Chinasky
Origin: China
HS Code: 820320
CCTVÂ Compression Tool for BNC / F / RCA Connectors (T5518)Â
Description:
The compression tool T5518 is for compressing waterproof connectors(BNC/F/RCA). It connects radial connectors to coaxial cable. And it customizes the length of cable used to connect components.
Features:
| Tool Compressed Distance | |||
| Before(±0.2) | After(±0.2) | ||
| Min. | Max. | Min. | Max. |
| 27.5 | 54.8 | 19.5 | 46.8 |
Instructions:
Step 1:
1) Trim back the outer jacket approximately 1/2"
2) Trim the braided wire to approximately 1/4" length and fold it back over the outer jacket
3) Remove approximately 1/4" from the dielectric. This should leave approximately 1/4" of center conductor exposed and 1/4" of the dielectric exposed. Please review the diagram as shown.
Step 2:
Insert the stripped cable into the connector. Push until dielectric rests against the bottom of the relating ring inside the connector.
Step 3:
Place the connector with cable into the tool's holder.
Step 4:
Squeeze the handles.
Step 5:
Remove the compressed connector from the tool.
Â
For example, it can be used for our connector model No.CT5083/RG59, CT5081, CT5082
Â
Size: 125*58*20mm(L*W*H)
Net Weight: 256g(280g including blister packing)
 CCTV Compression Tool for BNC / F / RCA Connectors (T5518)
Â
Description:
The compression tool T5518 is for compressing waterproof connectors(BNC/F/RCA). It connects radial connectors to coaxial cable. And it customizes the length of cable used to connect components.
Features:
| Tool Compressed Distance | |||
| Before(±0.2) | After(±0.2) | ||
| Min. | Max. | Min. | Max. |
| 27.5 | 54.8 | 19.5 | 46.8 |
Instructions:
Step 1:
1) Trim back the outer jacket approximately 1/2"
2) Trim the braided wire to approximately 1/4" length and fold it back over the outer jacket
3) Remove approximately 1/4" from the dielectric. This should leave approximately 1/4" of center conductor exposed and 1/4" of the dielectric exposed. Please review the diagram as shown.
Step 2:
Insert the stripped cable into the connector. Push until dielectric rests against the bottom of the relating ring inside the connector.
Step 3:
Place the connector with cable into the tool's holder.
Step 4:
Squeeze the handles.
Step 5:
Remove the compressed connector from the tool.
Â
For example, it can be used for our connector model No.CT5083/RG59, CT5081, CT5082
Â
Size: 125*58*20mm(L*W*H)
Net Weight: 256g(280g including blister packing)
Â
Vanity Lights,Glass Vanity Light,Indoor Solar Lights,Stair Lights Indoor
Foshan Nanhai Pinming Electrical Appliance Co.,Ltd , https://www.mavcadonf.com