The impact of cold air on the southern region will end
Zhejiang, Yunnan and other places still have more obvious rainfall
First, important weather
1. Zhejiang, Yunnan and other places have more obvious rainfall
On the 14th, heavy rain occurred in parts of southern Yunnan, eastern Zhejiang, and northeastern Fujian, with heavy rain (50-80 mm) in some areas.
2. Northeast China's Jiangnan South China cooling will end
With the cold air moving eastward and southward, the cold air power has been significantly weakened. However, during the day on the 14th, the temperature in the eastern part of the Northeast, the eastern part of the Yangtze River, and the central and northern parts of South China will drop by 3 to 5 °C; northeastern Inner Mongolia, northwestern Shanxi, and northern Hebei. There will be frost in the northern part of the northeastern region, and cold weather in parts of Jianghan and northern parts of the south of the Yangtze River.
3. “Sanba†will continue to move west-northwest
This year's No. 16 super typhoon "Sanba" center is located on the northwestern Pacific Ocean about 990 kilometers northeast of Manila, Philippines at 05:00 on the 14th, that is, the north latitude is 17.6 degrees, the east longitude is 129.7 degrees, and the maximum wind power near the center is 17 meters (60 meters / Seconds), the central minimum air pressure is 915 hectopascals. It is estimated that "Sanba" will move to the north-west direction at a speed of about 15 kilometers per hour, and the intensity will be strengthened. There will be no impact on China's offshore waters before the evening of the 14th.
Second, the specific forecast for the next three days
From 08:00 to 15:00 on the 14th, there were small to moderate rains in parts of western Xinjiang, northern Heilongjiang, eastern and southern Tibet, most of Yunnan, eastern Zhejiang and Jiangxi, among them, southern Yunnan, eastern Zhejiang and Fujian, and other places. There is heavy rain, and there are heavy rains in some parts of eastern Zhejiang. Some of the above areas are accompanied by strong convective weather such as thunderstorms. There are 5 to 7 northerly winds in the eastern sea area. 
From 08:00 on the 15th to 8:00 on the 16th, there are small to moderate rains in the northwestern part of Xinjiang, the central and eastern part of the Qinghai-Tibet Plateau, the eastern part of the northwestern part of the country, the central and western parts of Yunnan, the eastern part of Zhejiang and Jiangxi, the eastern part of Hainan, and Taiwan. Heavy rain occurred in parts of southeastern Tibet, southwestern Sichuan Basin, and northern Taiwan. The northeastern part of the East China Sea, the Taiwan Strait, and the east side of Taiwan will have a northerly wind of 7 to 9 and a gust of 10 winds. 
From 08:00 to 17:00 on the 16th, there are small to moderate rains in the western part of Xinjiang, the eastern part of the northwestern part of the country, the central and eastern part of the Qinghai-Tibet Plateau, most of the southwestern part of Hainan, the south-central part of Hainan, the eastern coast of Zhejiang, and Taiwan. Heavy rain occurred in parts of the western part of Guizhou. Most of the East China Sea will have 9-11 winds. The winds in some sea areas will reach 12-13, and the gusts will be 14-15. The nearby sea area passing the "Samba" center will have 15-16 winds and gusts up to 17 In the central and southern waters of the Yellow Sea, there will be 7 to 9 grades and gusts of 10 northeast winds. 
ABS Sheet for clamshell and plastic to keep an ester composition of the material is the biggest heavy quality, poor thermal conductivity. The temperature between the molding temperature it depends on both raw materials, is 240--265 degrees, the temperature is too high, ABS will decompose liquidity too low PC material is poor.
Abs Sheet for clamshell (Acrylonitrile Butadiene Styrene) has good chemical and stress resistance .It combines toughness with rigidity and creep resistance .Easily thermoformed resulting in excellent mould detail .Easily machined , die cut , routed , sanded , buffed and polished.
ABS Sheet for clamshell Key Features :
- High rigidity and impact strength
-
Excellent abrasion resistance
-
Excellent electrical properties, moisture and creep resistance
-
ABS has good chemical and stress cracking resistance to inorganic salt solutions , alkalis and many acids .( Except strong oxidizing acids )
- ABS is easily machined to close tolerances , is tough , dimensionally stable and may be thermoformed.
ABS Sheet for clamshell Applications:
- Automotive interior and exterior
- Aircraft interior trims
- Home appliances
- Architectual model buildings & prototyppe models
- Luggage
- Machine parts and rollers
- Pipes & fittings
- Trays
ABS
Abs Sheet,Abs Rod,Plastic Abs Rod,Plastic Abs Sheet
SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , http://www.xyhplastic.com