1, first of all to check the circuit of their own factories, whether there are more doors and windows equipment are connected to the 380V of electricity. Here to remind one point, the leakage protection device at the knife must use three-phase four-wire, otherwise it will cause the phenomenon of tripping.
2. Check if the connection of the air compressor is firm and avoid air leakage.
3, adjust the cylinder. Check whether the speed control of the cylinders of all doors and windows processing equipment has been released, in particular, the three devices of cutting bridge aluminum processing saw, broken bridge aluminum profile milling machine and broken bridge aluminum profile corner saw. In addition, when adjusting the side pressure cylinder of the cutting saw, it is necessary to first put the broken aluminum profile on the equipment work table, then adjust the position of the cylinder according to the size of the profile, and finally lock the cylinder support plate.
4ã€Adjust the feed speed of the saw blade for the door and window processing equipment. During the test process, if it is found that the feed speed of the saw blade is too fast or too slow, the speed control valve on the feed cylinder of the door and window equipment can be adjusted to obtain an appropriate feed rate.
All in all, we buy back door and window processing equipment for our own use. We must always pay attention to maintenance. The equipment shall be overhauled at intervals to avoid problems with the door and window processing equipment when the project progress is tight.
Steel Structure House refers to the
building which is structured by steel beam and column, its advantages are: 1,
light weight, high strength, the weight of Steel Structure is about 1/2 of
concrete structure. 2. Safety and reliability, good resistance to wind and
earthquake. 3. The steel structure components are made in the factory, reducing
the work load in the field, shortening the construction time, and meeting the
requirements of the industrialization. 4. The steel structure factory is made
of reliable quality, accurate size, convenient installation, and easy to
cooperate with the related parts. 5, steel can be recycled, and the environment
is less polluted when it is built and dismantled.
Prefabricated Steel Structure House
Prefabricated Steel Structure House,Light Steel Frame House Building,Prefab Light Steel House Villa,Prefabricated Steel Structure Residential House
Zhongda Steel Structure , http://www.zhongdametal.com