Living room Feng Shui knew (2)

Living room Feng Shui knew (2)

Today, I will continue to share with you the knowledge about the living room feng shui, which will make the whole family healthy, the business flourishing and the days getting hotter and brighter.

1. The entrance door must not be facing the elevator building. Its door cannot be facing the elevator door, and it is not conducive to the financial development of the shot. Households are susceptible to disease.

2, the door can not be straight to the windows, back doors or toilet doors and windows is the opening of the qi into the room, the door can not be in line with the window, the back door, forming the front and back doors to wear, so that the qi out of the church can not be gathered in the house, so wealth Unable to gather, so it is said to return.

The toilet is to provide space for people to excrete. The nature is not clean, so the door should not be straight to the toilet. The direct entrance of the gate to the toilet will make a mistake in the financial investment, which will cause people's wealth to enter the wealth and damage the family's wealth.

3, the door and the living room should be set off entrance feng shui tips "hello cyclone, avoid direct flush." The front door and the living room are equipped with a porch or a low cabinet to provide a buffer. The qi can be convoluted and gathered in the living room. The inside of the house is also hidden. The outside is not easy to pry into. Hidden deep inside the home, a symbol of good fortune stretch.

4, the living room should be located in the front of the house to enter the front door should first see the living room, while the bedroom, kitchen and other space should be located in the rear of the house. Inverted use of space configuration, mistakenly set the living room in the rear, will result in the pattern of returning wealth, easy to make the money transport down.

5, live in home Wang in the diagonally opposite corner of the door is usually living in the living room, the main conditions for the quiet, stable, can not be the channel of the line, in general, Wang is entering the living room door diagonally. Since Mong Kok is often seen diagonally opposite the gate, it is not appropriate to hang a mirror because the mirror has the effect of reflection and it is easy to hinder the family's fortune; it causes bad fortunes and loss of opportunity. The best location is to plant mascots that can boost the fortune. The best way is to plant a broad-leaf green plant with vitality.

6, the living room should not be dark enough for the first glorious living room Feng Shui, so try to avoid placing too many potted plants on the balcony, so as not to block the light. The bright living room can bring about strong family transportation, so the dark wall of the living room should not be too dark.

7, the living room floor should not be uneven The living room floor should be flat, should not have too many steps or manufacturing levels. Some living rooms use high and low levels of partition design, so that the floor level has obvious changes, so the family will be more bumpy due to the ups and downs of the floor.

8, the living room can not be a moving line The living room is a place to gather Wang Qi, should be required to be stable, should not be planning the living room in the moving line, making people move too frequently. The living room is located in the lane of the passage, making it easy for family members to meet or visitors to visit. Otherwise it will affect the homeowner’s career and relationships.

9. If there is a beam spanning across the living room, the ceiling of the living room should be covered with a decorative beam, which will create a feeling of oppression. People sitting under a crossbeam can easily cause mental stress and lose their fortunes. As soon as possible to cover the beams in the ceiling of the mezzanine.

10. The living room should be decorated with circular shapes. The living room is a place where families and friends and relatives meet. It is most necessary to create a lively and harmonious atmosphere. The circular shape is a symbol of dynamism, so circular lighting, ceiling shapes, and decorations have a warm and lively atmosphere.

Steel Reducer,a kind of industrial pipe fittings,  used to connect two different diameter pipes . According to different shapes, divided into concentric reducers and eccentric reducers. Materials include stainless steel, alloy steel, carbon steel. Forming process commonly used to suppress necking, expanding suppress or necking plus expanding repression,some specifications  may also be stamping.
1. suppress necking / expanding suppress forming
suppress necking forming process is to put  pipe into the forming molds,suppress necking another pipe end to smaller size . Depending on the another end size changing, divided into one time  press forming or more  times press forming.
2. Stamping  forming
In addition to using steel pipe as raw material to produce reducers, we can use stamping forming to make plates to reducers . the stamping molds are designed according to reducers inside ourside diameters, the molds makes steel plate to stamping ,cutting , stretch forming.


Product Name:Reducer Pipe
Size:DN10-DN2500
Materials: A234 WBP-WP1-WP12-WP11, A403 WP 304-304L-316-316L, A402 WPL3-WPL 6,A860 WPHY 42-46-52-60-65-70,PG370,C20
Thickness: 2mm-100mm 
Standard:GB/ANSI/ GOST/ JIS/ DIN
Crafts: Cold extrusion, Thermoforming. 
Connection: Welding 
Package: Wooden boxes,Wooden pallets,According to customer requirements.
Brand Name: HY 
Place of Origin: China (Mainland) 
Certification: ISO.UKS.SGS.BV 
Application: Chemical, Water, Oil and gas, Electricity
Reducer PipeCarbon steel reducersPipe fittings production process

Reducer Pipe

Reducer Pipe,Pipe Reducer,Steel Pipe Reducer,Silicone Rubber Reducer Pipes

CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com