Analysis of the selection of sliding bearing grease

Source: China Bearing Network Time: 2018-03-15

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1. Sliding bearings can also be smoothed with smooth grease; consider the following points when selecting smooth grease:
1) Bearing load is large; when the rotation speed is low; smooth grease with small penetration degree should be selected; vice versa, high penetration bearing should be selected. High-speed bearing should use smooth grease with smaller cone penetration and good mechanical stability. The viscosity of the smooth fat base oil is lower.
2) The dropping point of the selected smooth grease is usually higher than the working temperature of 20-30 Â° C; in the case of high temperature continuous operation; pay attention not to exceed the smooth grease to allow the temperature scale.
3) When the sliding bearing works in water or wet environment; should choose calcium-based, aluminum-based or lithium-based smooth grease with good water resistance.
4) Select smooth grease with good adhesion.
2. Selection of smooth grease for sliding bearings:
The load is <1MPa; the circumferential speed of the journal is less than 1m/s; the maximum operating temperature is 75Â°C; the calcium base grease No. 3 is used.
Load 1-6. 5MPa; journal circumferential speed 0. 5-5m / s; maximum operating temperature 55 Â° C; use No. 2 calcium base grease,
The load is >6. 5MPa; the circumferential speed of the journal is less than 0.5m/s; the maximum operating temperature is 75Â°C; the calcium base grease No. 3 is selected.
Load <6. 5MPa; journal circumferential speed 0. 5-5m / s; maximum operating temperature 120 Â° C; use No. 2 lithium grease,
The load is >6. 5MPa; the circumferential speed of the journal is below 0.5m/s; the maximum operating temperature is 110Â°C; the calcium-sodium grease of No. 2 is used.
The load is 1-6. 5MPa; the circumferential speed of the journal is less than 1m/s; the maximum working temperature is 50-100Â°C; the lithium base grease No. 2 is used.
The load is >5MPa, the circumferential speed of the journal is 0.5m/s; the maximum working temperature is 60Â°C; the calendering grease No. 2 is used.
In a humid environment; temperature is 75-120 Â° C; should consider calcium-sodium grease smooth grease. Under humid environment; operating temperature below 75 Â° C; no calcium base grease No. 3; also available aluminum grease Operating temperature is 110-120 Â° C; available lithium grease or sulfhydryl grease. When the collection is smooth; the consistency is smaller.
3. Smooth cycle of smooth grease for sliding bearings:
Occasionally work; unimportant parts: shaft speed <200r/min; smooth period 5 days, shaft speed >200r/min; smooth period 3 days.
Successive operation: shaft speed <200r/min; smooth cycle once every 2 days, shaft speed >200r/min; smooth cycle once every day.
Continuous operation; operating temperature is less than 40 Â° C: shaft speed <200r / min; smooth cycle once a day, shaft speed > 200r / min; smooth cycle once per shift.
Successive operation; operating temperature 40-100 Â°C: shaft speed <200r/min; smooth cycle once per shift, shaft speed >200r/min; smooth cycle twice per shift.

Recommend to friends comments close window

Bearing related knowledge

SKF bearing appearance when viewing "point 5 target"
The reason why the temperature of NSK bearing is too high is the difference between the grinding tapered roller bearing and the fan bearing of the "imported bearing ring double end"

This article links to http://
Please indicate the bearing network http://

Previous: SKF Aviation Rolling Bearing Skills (1)
The next part: Rolling bearing residual magnetic skill conditions (2)

CPVC Compound is developed with unique advanced technology and currently production capacity have fulfilled 3,000 tons per year. it has combined improved resins with state of-the-art compounding technology to produce a family of compounds that offer an outstanding blend of physical properties and excellent process ability These compounding are customized solutions manufactured CPVC pipe systems for cold and hot water from 1/2" to 2" CTS .

CPVC Compound

CPVC Compound for Pipes , CPVC Compound for Fittings , Resin CPVC Compound , CPVC Compound for Industrial , CPVC Powder for Pipes , CPVC Compound for Extrusion , CPVC Resin for Pipes , CPE Compound for Rubber

Shandong Novista Chemicals Co.,Ltd (Novista Group) , https://www.novistachem.com