After a long time of housing, there will always be problems like this. For example, when the walls are wet, the walls will be moldy. If the walls are wet and moldy for a long time, bacteria will easily grow and spread, resulting in damage to people's health. How do you deal with the wall surface dampness ? How do you remove the stubborn mold on the wall? In this article, let's take a look at the solutions to these problems. Let's take a look!
How to deal with the wall damp
1, pay attention to the need for frequent ventilation
How to deal with the wall dampness ? Frequent ventilation, in the south and back to the South, is particularly prone to wall dampness, so owners in the south can install an exhaust fan indoors, when the air circulation after the wall will not be so easy It is wet.
2, the reasons for more wet walls first to identify the reasons
There are many reasons for the dampness of the wall, such as the humidity in the room, the connection between the room and the bathroom, or the freezer room next door. After knowing what causes the wall to be wet, it can be targeted according to the reasons. In addition, if the dampness causes cracks on the wall, you need to find a decoration company to help repair it.
3, using quicklime and desiccant
Lime and desiccant are sold on the market, and they can be used separately or mixed, and then they can be prevented in all corners of the room.
4, dehumidifier dehumidification
Dehumidifiers are also sold in the market and are available in a variety of models. You can also choose to go to the appliance market, and you can also purchase a dehumidifier that is rated well online.
5, clothes with water do not dry indoors, many times the wall will be wet due to moisture in the room, and put a shoe in the door, so that moisture as little as possible into the room.
6, using a small sun to remove moisture
This method is particularly suitable for use in the winter before the wall in the wet, the use of small sun at the corner of the room where the moisture is heavy, the first can let the water away from the wall, enhance the depth of the entire room.
Remove stubborn wall mold
1. The cause of mildew in the wall
a, due to leakage of the drain pipe or the water supply pipe, so that the wall surface damp after moldy;
b. In rainy days, careless water infiltrates into the room, causing the wall to become wet; or cracks may occur in the walls that intersect with the interior, resulting in poor sealing and allowing rain to infiltrate;
c. The indoor wall insulation has not been handled in place, so that there is a big difference between the outdoor and indoor. Once it is cold, the water will condense on the wall, resulting in mildew and mildew.
2, moldy steps in the wall
a. The first step is to polish with sandpaper. If delamination occurs, use a spatula to flatten it;
b. In the second step, if the wall is uneven, use putty to repair it first.
c. In the third step, if the wall surface is flat, you can apply a brush to seal the primer and then brush the latex paint.
The article is summarized: Well, the above description mainly describes how to deal with wall dampness and how to remove obstinate mold from the wall. This article has also been introduced here. Share a friend in need as a reference. I hope this article can help. everyone.
How to deal with the wall damp
Grip Neck Caster series , as a professional Chinese caster manufacturer ,with rich R&D experience , which enable us to customize according to client's request , Size of stem ,top plate wheel material , type of brake , just let me know what you want , Rich Industrial Caster series , various from rigid wheel caster , Swivel Caster and Brake Caster , full size series make us become one-stop caster services center for you .
Grip Neck Caster
Grip Neck Caster,Fixed Caster,Grip Neck Stem Caster,Grip Neck Stems Industrial Casters
Zhejiang Lingda Caster Co., Ltd , https://www.ldcaster.com