Stainless steel vacuum pump conditions of use

The use of stainless steel vacuum pumps, like other products, not all conditions can be used, but only under some conditions, that is, its use is conditional, let's understand the next stainless steel vacuum pump What are the conditions of use? Stainless steel vacuum pump conditions of use 1, stainless steel vacuum pump for closed system vacuum use. Such as vacuum packaging, vacuum forming, vacuum attraction. 2, the inlet pressure range: 100Pa ~ 100000 Pa, beyond this range will work vacuum pump exhaust mist will produce. XD rotary vane vacuum pump working environment temperature and inhalation gas temperature should be between 5 ℃ ~ 40 ℃. 3, stainless steel vacuum pump can not remove water or other liquids. Can not remove explosive, flammable, high oxygen content, corrosive gases. 4, the general supply of the motor is not explosion-proof, such as explosion-proof or other special requirements of the motor must meet the relevant standards. The above four points is a brief introduction of stainless steel vacuum pump conditions of use, hope that through these introduction, you have a deeper understanding and understanding of the use of stainless steel vacuum pump. Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Lindj (QQ / WeChat: 181817456) Starting: http://beng.liuti.cn/ (Service Hotline: 400-6030-811)