Import oil bearing oil change operation knowledge

No matter what the bearings, we all need to change the oil, and now the quality of imported bearings is better, in use, oil change is also essential, although the import bearing time does not change oil will not be a problem, but for a long time do not change Oil, it will affect the life of imported bearings. Therefore, we use the use of imported bearings, bearings should pay attention to the oil change, the oil changed for the better, the bearings can operate well, so as to allow the bearings to run well. Then imported bearings in operation, when the oil change it? Let's make a brief introduction. The two big complicated questions about the maintenance technology of the imported bearings are: when to change oil and how much oil should be changed. If the oil is too little, imported bearings will be scrapped in advance; if too much oil, imported bearings will be in trouble or long-term hazards to the power coil and coil. Traditionally, the lubrication plan is based on time. Equipment suppliers often make lubrication plans based on operating hours. Also, equipment suppliers often instruct lubricants on their maintenance schedules. For staff, short-term replacement of lubricants is a very common thing, but often add too much grease. For example, require staff to change the lubricant every two to three weeks, adding one ounce of grease each time. These suggestions from the very beginning led to them being built on some unknowing element of no real significance. Lubrication interval has a simple premise: the bearings do not stop due to dry and collapse conditions to maintain the proper operation of equipment. This is a fixed concept of prevention. However, we must maintain the balance between greating hunger and excessive overexposure.