Most of the currently used projector adjustment tables are 3-axis and 6-axis adjustment tables. After a certain period of time, the raster drift will occur. It is necessary to re-adjust the mechanical adjustment to ensure that the display screen is not distorted and to avoid adjacent screens. Misalignment.
Adjustment of color
Currently used large-screen projector lamps are mostly UHP bulbs, in the use of projector bulbs after a certain period of time will appear different degrees of attenuation, will certainly affect the brightness of the projector, resulting in the color of the adjacent screen between the big screen And uneven brightness, thus affecting the user's visual effects. In this case, the color and brightness of the projector can be adjusted by the relevant software, thereby effectively ensuring the consistency of the large screen effect.
Projector lens cleaning
The lens of the projector is an important part of the projector, made of special optical materials, and will have a film on the surface of the lens. After a long time use, there will be some dust on the surface of the lens. If you do not clean it, over time, it will affect the life of the lens, and it will also affect the display effect of the projector.
Projector core light path assembly cleaning
The color wheel is an indispensable component of the DLP display technology, and it plays a key role in the stability of the system. Therefore, after a period of time, the component should also be cleaned. There is a micro-mirror inside the projector core and a light-pass ROD assembly.
Screen cleaning
At present, the large-screen screen has two kinds of glass screens and resin screens. The screen must be cleaned regularly during use to ensure that the screen is not deformed and does not affect the display.
Mirror cleaning
The large-screen systems currently sold are mostly designed for rear projection boxes, which can greatly reduce the thickness of large-screen cabinets, while also saving a lot of installation space for customers, and it is also beautiful. However, this type of box structure design must have a reflector in the box body. The reflector needs to have a reflectance of 98% or more. It belongs to a special product, and usually a reflection film is applied on the surface to meet the requirements. Reflectance requirements. However, the mirror will collect a certain amount of dust on the surface after being used for a period of time. If it is cleaned from time to time, it may be eroded by the dust on its surface to reflect on the reflective film, which affects the display effect.
Replacement of spare parts
Lamps are the necessary spare parts for large screens. Lamps themselves also have problems with their lifetime. The average service life is about 6,000 hours.
Flap Disc Adhesive
Single component Flap Disc resin adhesive glue for making flap disc:
Flap disc adhesive usage:
Composition ratio: A: B = 100:25 (weight ratio)
Available time: 25℃×25-35 minutes
Curing conditions: 25℃×4-5 hours of basic curing
72 hours for maximum strength
Flap disc adheasive glue features:
1. This single component expoxy glue is a room temperature solidification type, yellow brown viscous epoxy resin adhesive;
2. This flap disc epoxy glue can be cured at low or normal temperature, with fast curing speed and certain stop-flow;
3. after curing, the bonding part has high bonding strength, shock resistance, shock resistance, good hardness and good toughness;
4. good acid and alkaline resistance, moisture and waterproof, oil and dust resistance, moisture and heat resistance and atmospheric aging;
5. curing products have good insulation, compression resistance, high bonding strength electrical and physical characteristics.
Scope of resin flap disc glue application
1.. Flap wheel with handle chuck, flap disc, flap wheel, vertical flap disc, plastic flap wheel.
2.. ceramics, wood, glass, fiber products and hard plastic packaging bonding, has excellent bonding strength;
3.. not suitable for bonding elastic or soft materials.
The related abrasive products we can supply is Flap Disc Backing Pad, Abrasive Flap Disc , Bonded Abrasives , and Abrasive Machine such as Flap Disc Making Machine,Abrasive Belt Making Machine, Flap Wheel Machine , Polishing Machine ,Sanding Disc Machine, if you have any needs about abrasive tools, please kindly feel free to contact us.
Single componet epoxy adhesive,Flap Disc Adhesive,Flap Disc Epoxy Glue,Synthetic Resin Flap Disc,epoxy resin for flap disc
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com