1. Conduct routine inspections on a planned basis based on equipment operation and customer needs;
2. To ensure more efficient operation of the evaporative cooling unit, please use this product under the following conditions:
(1) Ambient temperature: 18 ° C - 45 ° C
(2) Relative humidity of the environment: ≤85%;
(3) Atmospheric pressure: 86Kpa-106Kpa;
(4) The water supply needs to be softened, the water supply temperature is ≤ 45 ° C, and the water supply pressure is 0.15-0.6 Mpa;
(5) The voltage deviation does not exceed ±10% of the rated voltage;
(6) The ambient air quality of the use shall meet the standards of GB 3096 (above 3);
(7) Non-corrosive environment.
3. This product is flammable. Please do not approach the fire during transportation, installation and operation.
4. Please pay attention to whether the inlet pipe and the drain pipe are connected well before use, otherwise the leakage may cause damage to other equipment or products.
5. To ensure the best results of this machine, ensure that there are doors or windows that are open enough. If there are not enough open doors or windows, you can load the blinds or install other mechanical ventilation equipment.
6. During the operation of the machine, do not disassemble the accessories such as the evaporator and the top cover. If the machine needs to be repaired or maintained, the power should be cut off first, otherwise the machine may be damaged or human casualties may occur.
7. Check the condition of the motor during installation. Do not use fuses or other wires with incorrect capacity.
8. In order to ensure the cooling effect, it is considered to install a filter in areas where the air is turbid.
9. For places with strict requirements on humidity and temperature, consult a professional to guide the use.
10. If there is any abnormality in the operation of this product, please inform the company or the distribution service point for maintenance.
Pre-insulation steel pipe
All kinds of medium thermal insulation and cold insulation engineering which the conveying temperature is in the range of -50℃~150℃, it is widely used in thermal insulation and cold insulation engineering of urban collective heating, warm room, refrigeratory, coal mine, petroleum, port and chemical etc industry.
Advantage
advantage
1. Strong corrosion resistance and waterproof ability, low comprehensive cost
2.Low heat loss, saving energy.The heat loss is only 25% of the traditional pipe material
3 long service life
4. Less land area and fast construction are conducive to environmental protection
Packaging Details
Plastic caps on both ends, Steel bundle, Woven bag or acc. to customers' request.
Delivery Time
15 days after receiving deposit
If you have any questions, please contact with us directly and welcome you can visit our Factory.
Pre Insulated Pipe,Pre-Insulated Steel Pipe,Steel Jacket Insulating Steel Pipe,Steam Insulation Steel Pipe
HEBEI CHENGYUAN PIPE INDUSTRY GROUP CO.,LTD , http://www.hbcytube.com