The bathroom door is the general name of the bathroom door and the bathroom door. The bathroom and bathroom environment is damp and the ventilation requirements are higher. Therefore, the bathroom door is generally made of plastic steel, aluminum alloy, titanium magnesium alloy and glass.
Type of bathroom door
1. Aluminum alloy bathroom door:
All aluminum alloy doors have a feature that is waterproof and resistant to deformation. However, because the materials are different, the texture is not the same as the bedroom door. The aesthetics are not very good, especially for some homes. Or Chinese style, wood grain and antique things are much more suitable.
2, plastic steel door:
The waterproofness of this door is very strong, the price is very cheap, generally tens of dollars, 100 more than 200 is good, but the level of visual effect of this door is very low, many small restaurants use this The door is very easy to change color, so unless it is a rental room and there is no need for decoration.
3, wooden door:
There are three types of wooden doors, PVC film doors with no paint on the surface can not be used in the bathroom, because the waterproofness of the film is not painted, moisture entering the substrate is easy to cause foaming deformation, the probability of not doing paint is too great. And of course there is no problem in the kitchen.
4. Titanium-magnesium alloy door:
Titanium-magnesium alloy door first solves a major shortcoming of the bathroom. It can be said that it is a waterproof general of the bathroom door. More than 95% of the wooden doors of the home decoration are used for less than one year after the decoration, and it is found that the water is blushing under the door cover, and then it is issued. Black rot, affecting the appearance and use, titanium-magnesium alloy adopts new technology, can be made into the same color as various natural woods, such as teak, black walnut, red walnut, white oak, Sapele, pure white. Champagne, brushed, and other colors.
How to choose the bathroom door
Second, bathroom door selection skills:
1. We must first look at the size of the bathroom in the home. If it is small, in order not to let our bathroom have a great sense of oppression, we should make room for the bathroom as much as possible. The most effective way is to choose It is best to choose the sliding door when the door is used. If we choose the sliding door, we must choose the sliding door with very good guide rails, which can effectively reduce our troubles in the future.
2, of course, if your bathroom has a large enough area, we don't need to save this space at all. At this time, we can choose a style with more sealing and good sealing. This kind of door can provide great for consumers. Choosing space, the bathroom door we are going to talk about today is also mainly for opening the door.
3. After the door opening method is selected, we should start with the material of the door. The general bathroom is the most humid place in the whole family. Therefore, we must take this into account when selecting the door material. What time is it:
1), choose to use the steel door that is safe but not very beautiful, its moisture resistance is superior.
2), the door of the steel core of the steel plate can be waterproofed, but the style of the door is not much, and there is little room for selection.
3), choose the door of aluminum-magnesium-titanium alloy material, the waterproof function is good, the style is more, the color is more abundant, the other needless to say, the thickness of the light material can be seen as good or bad, as long as the quality is good, use This kind of door should be the best choice.
4), choose stainless steel plus glass door, waterproof and use function are good, but the price is relatively high, the use of ordinary room decoration is not cost-effective, in addition to the full frosted semi-glass door type is also a good choice for the bathroom door.
4, although the plastic steel door can be used to make the bathroom door, but its shape is not very good, so most home decoration is still prefer to choose aluminum door, it still has good moisture resistance, and the price is moderate , style and color are still relatively rich, able to meet the middle and low-end consumer groups.
5. For many high-level consumers, the aesthetics of steel doors and aluminum doors are far from their requirements. Therefore, they will choose wooden doors to make the bathroom doors. Matching their home decoration style, when choosing this type of door, we must choose the door line is made of solid wood or wood plastic, its moisture resistance is better than the whole solid wood door.
Third, the installation method of the bathroom door:
Under normal circumstances, the installation methods of different types of bathroom doors are different. The installation methods of different types of bathroom doors are as follows:
1. Installation method of large folding door:
We must first put the hanging wheel or more than four fixtures in the guide rail. The holder must be placed in the center of the rail, then the door frame and rail are screwed, then horizontally installed in the door, and then the door leaf is installed. The lower positioner pin should be placed below the door with the lock hole. If the folding is skewed, we can raise the upper hanging wheel to adjust the up and down. After adjusting, be sure to lock it with a small internal hexagon to avoid the use of the middle hanging wheel nut to fall off.
2, the sliding door installation method:
First fix the frame and rails of the door with screws and install them horizontally into the door hole, then install the door leaf. If the door lock is asymmetrical or cannot be locked, the upper frame can be adjusted up and down by using the outer frame lock. If the two door leaves are overlapped, the upper pulley can also be adjusted for up and down adjustment.
3, the installation method of the hanging door:
First put the hanging wheel or four or more fixtures into the rail. Everyone noticed that the holder should be placed in the middle of the guide rail, then the frame and the guide rail were screwed, then horizontally installed into the door opening, and the door leaf was installed. The lower positioners need to be installed at the overlap of the door leaf. If the door lock is asymmetrical or cannot be locked, the lock of the outer frame can be adjusted up and down. If the overlap of the two doors is skewed, we can adjust the upper hanging wheel to adjust up and down.
4. Installation method of swing door and small folding door:
Open the large hole installation, you can directly put the door into the door hole and fix it in the door frame with screws; the connecting piece will be pulled horizontally and then placed in the door hole and then fixed with screws; if the split line is to be separated first Fix it on the door frame and then place the door in the door hole to fix it. After the installation is completed, it is necessary to check whether the door leaf switch is flexible, whether the reserved switch gap is up to standard, and whether the lock position is misaligned. Once the lock is not locked, you need to check two aspects:
(1) Whether the locking piece outside the keyhole is placed too much.
(2) Whether the outer frame of the door is at an angle of 90 degrees, and whether the gap in the lock position is too small, to see if it can make some adjustment between the wall and the outer frame.
5, double-edge side swing door installation method:
First open the inner and outer frames, then put them into the hole, and connect them according to the size of the wall. Remind everyone to check whether the sealing plate matches the inner and outer frames during the connection process. If it does not match, the space between the inner and outer frames needs to be adjusted, and then the sealing plate is adjusted according to the uniform size. If the sealing plate is too small, the sealing portion can be connected to the outside for 10-15mm; if the sealing plate is too large, the sealing plate can only be sawed off according to the size of the inner and outer frames, and the door frame should be fixed firmly on the wall before the sealing plate is closed. Finally, the cover is completed.
HUATAO GROUP AS A WORD RESOURCES DOCKING PLATFORM TO PROVIDE THE WHOLE SOLUTIONS FOR R&D, DESIGN, PRODUCTION AND APPLICATION AND APPLICATION OF GEOSYNTHETIC MATERIALS.
We have dedicated to the research and development , application and export of geosynthetic materials,filtration materials, composite materials,building waterproof materials. Main products including hdpe sheets,hdpe lining,GEOTEXTILES SERIES,Geomembranes SERIES, Geocomposites SERIES, EOCELLS SERIES, Geogrids SERIES, Geonets SERIES, DRAINAGE MATERIAL SERIES, GEO BAGS SERIES, WATER-STOP BELT SERIES, WATERPROOF ROLLS SERIES, SUNSHINE BOARD SERIES, CORRUGATED PLASTIC SHEET SERIES ETC. Formed the overall system solutions of railway-highway traffic engineering, green environmental protection engineering,hydraulic engineering, ecological restoration engineering, petrochemical industry-coal chemical industry seepage control engineering, the aerosol haze governance, sponge city, underground pipe rack, mountain slope protection engineering and so onmore than 50 items.
hdpe sheets
Geosynthetics Materials,Geosynthetic Fabric,Geotextile Fabrics,Geomembranes,Geogirds and Drainage layer
HUATAO GROUP LTD , https://www.huataogroup.com