[switch socket installation specification]
1. When not using the safety socket, the height of children's activities in nurseries, kindergartens and primary schools should not be less than 1.8m.
2. The concealed socket panel is close to the wall, with no gaps around it, and the installation is firm. The surface is smooth and clean, free from chipping and scratches.
3. The installation height of the socket of the workshop and test room shall not be less than 0.3m from the ground, and the socket installed in a special place shall not be less than 0.15m, and the installation height of the same indoor socket shall be the same.
4, ground socket panel flush with the ground or close to the ground, the cover fixed firmly, sealed well.
5. The switch installation position is easy to operate. The distance between the edge of the switch and the edge of the door frame is 0. 15～0. 2m, the height of the switch from the ground is 1.3m, the height of the wire switch from the ground is 2～3m, and the height of the switch is less than 3m. Not less than 100mm, the cable exit is straight down.
6, the same type of parallel installation and installation of the same indoor switch height, and the control of a good order. The distance between the adjacently installed pull-wire switches is not less than 20mm.
7, concealed switch panel should be close to the wall, surrounded by seamless, securely installed, the surface smooth and clean, no fragmentation, scratches.
[switch socket installation precautions]
First, the planning focus: Consider the three major aspects of the home switch socket planning that is to determine the number of installation and installation location, you can consider three aspects to consider. The first is to consider the function of each space of the house, determine the function of each space, such as the bedroom, study, living room, audio and video room; second, consider the main electrical appliances, furniture placement and approximate size, such as cabinets, TVs, refrigerators, washing machines The third is to consider the family's life habits and needs, such as installing a smart toilet, then the toilet position must be set to switch socket.
Second, the number of electrical appliances in each home is different, and the number of natural switch sockets cannot be the same. To determine the number of switch sockets needed at home, it can be determined by considering the three major factors mentioned above. Specifically, you can list all the appliances that will be used in each space, and then determine the number of switch outlets.
Third, planning switch socket installation position After determining the number of switch sockets, it is to determine the installation position. The position of the switch socket usually needs to consider the placement and size of appliances and furniture, and the family's lifestyle. The position of the switch socket has certain rules to follow, but it still needs to be determined by specific conditions.
Fourth, consider the long-term needs of appropriate ahead of time In determining the number and location of switch sockets, should be appropriate to advance, consider the long-term needs. If the shoe cabinet may need to be installed afterwards, the toilet may be replaced with a smart toilet. Therefore, as far as possible in consideration of the current and near future all need to use switch sockets, you can set up a spare socket. In addition, if you are going to have children, the outlets in your home are best equipped with protective devices.
Xiaobian conclusion: The above is a detailed explanation about the switch socket installation specification and precautions. When installing the socket, these can help everyone to do a better job of installation. For more relevant knowledge, please continue to pay attention to this site Information platform.
Switch socket installation home decoration decoration home decoration size data home improvement decoration design home improvement
Kylin Chemicals Co Ltd has been focusing on R&D, manufacturing and supply of Silicone based high performance surfactants for over 15 years. Our high performance Silicone surfactants and novel technologies are marketed under the trade name KylinSil. KylinSil provides effective solutions to meet our customers' needs in the industries of paints & coatings, leather, water treatment and agrochemicals, etc. We have a professional team of highly qualified, trained and experienced engineers, who are always ready to serve you at product selection, effectiveness evaluation, product optimization till fully best matching your particular application needs.
KylinSil has a broad range of Silicone surfactants products, which are similar as Dow Corning 190, Xiameter OFX-0190, Dow Corning Q2-5211, Dow Corning 57, Perenol S-83 UV, Xiameter OFX-3667, CoatOSil 1160, CoatOSil 1211, CoatOSil 2812, CoatOSil 7001, CoatOSil 7602, CoatOSil 7608, CoatOSil 77, BYK 302, BYK 306, BYK 307, BYK 331, BYK 333, BYK 346, BYK 348, BYK 378, BYK 3510, Tego Wet KL 245, Tego Wet 250, Tego Wet 270, Tego Glide B1484, Tego Glide 410, Tego Glide 432, Tego Glide 450, etc.
Other Names:
Silicone Leveling Agent; Silicone Leveling Additive; Silicone Flow Agent; Flow and Leveling Additive for leather; Flow and Leveling Additive for Coating and Paint; Flow and Leveling Additive for PU; Silicone Antifoam; Silicone Defoamer; Substrate Wetting Additive; Silicone Flow And Leveling Agent; Silicone Flatting Agent; Polyether modified polydimethylsiloxane; Organosilicone Leveling Agent; Organosilicone Antifoam; Organosilicone Defoamer.
Silicone Flow and Leveling Agent
Silicone Flow And Leveling Agent,Silicone Leveling Agent,Silicone Surfactants Leveling
Kylin Chemicals Co., Ltd. , http://www.kylin-chemicals.com