Hand-written electric lettering pens are widely used for measuring tools, numbers on molds, production batch numbers of different brands, metal, glass, plastic marble and porcelain, etc., for engraving, marking or personalized signatures on almost all surfaces. The handwriting electric lettering pen uses the typical alternating current of the frequency cycle, and the high-speed vibration generated drives the high-hardness metal drill bit, which can be engraved easily. The shell of the handwriting electric lettering pen is made of impact-resistant plastic, and the pen head is generally tungsten Steel alloy and therefore very durable.
Â
The principle of handwriting electric lettering pen
Â
The hand-written electric lettering pen uses the periodic characteristics of the frequency of the alternating current to generate forced vibration, which causes the printing pin to vibrate at high frequencies, thereby marking a certain depth on the workpiece.
Â
The main structure of handwriting electric lettering pen
Â
The hand-written electric lettering pen adopts 220V AC power, generates high-frequency oscillation through the oscillation mechanism, and is transferred to the connecting rod by the connecting rod, so as to drive the engraving head to engrave on different materials. The amplitude can be adjusted steplessly by turning the knob to meet the writing requirements of different materials and different depths. The casing is made of engineering plastic injection molding, so it has good insulation performance and is safe and reliable to use.
Â
How to use handwriting electric lettering pen
Â
Turn on the power, hold the electric engraving pen in your right hand, tilt it slightly like an angle, and put your hand on the countertop, press and hold the micro switch to write, and release to stop writing. Do not press down hard when writing, it is slightly slower than usual. There is a knob on the upper part of the engraving pen to adjust the engraving speed. You can master its performance through repeated engraving to meet the font size and depth requirements of the engraving materials you need. The engraving pen is equipped with a hard alloy engraving head at the factory. It can meet the engraving of glass, metal, ceramics and other hard materials. However, for industrial continuous engraving, a special diamond engraving head is required.
After the engraving head is worn, unscrew the screw knob and replace the engraving head. So as to achieve the ideal effect, according to different materials, reasonable adjustment. When using a hand-written electric lettering pen, it should be noted that generally it should not be used continuously for more than half an hour in summer and more than 1 hour in winter to avoid damage to the coil. In order to ensure safe use, it is often necessary to check for electrical leakage. It is best not to place this product in a place where children can reach it to avoid accidents.
The above is the content about the principle, main structure and use method of handwriting electric lettering pen introduced to friends. I hope that through the above content, you can have more knowledge about the handwriting electric lettering pen. The electric lettering pen is small in size and light in weight. It can be used to complete the lettering of objects as it is written in the hand. It is a very practical lettering tool.
Kn95 Fold Flat 3D Mask,Kn95 5 Layers Face Mask,Kn95 Fold Flat Respirator,Kn95 Filters Cup Face Mask
Jiangmen anjian biotechnology co. LTD , https://www.anjianmask.com