A lot of customers are not sure how the new device is now filtered. What is used to filter the loop . What is the principle of work and the maintenance situation in the later stage. Today I will detail the filtration cycle principle of our automated water treatment equipment .
1. Hydraulic automation: Only the pump is the only kinetic energy in the whole system, and the pump will get energy when it is turned on.
2, no pressure system: the whole system is open without pressure, the operating energy consumption is lower than the conventional pressure system.
3. Aeration process: imitating the objective law of self-purification of water bodies in nature, through aeration, the pool water is activated and revitalized, and the immunity of the pool water is enhanced.
4, fine filtration process: through the seven-layer composite filtration layer fine filtration, fully remove organic pollution in water.
5. Prohibition of drug administration: All coagulants, coagulants, herbicides and other chemical agents are prohibited from being placed in the whole system.
6, no need to change the water: pool water recycling , a small amount of evaporated water per month, the pool water to maintain standards.
7. Automatic backwashing: When the fouling amount of the filter layer reaches the extreme value, the flow state in the filter changes, and the backwash is automatically backed up, and the dirt is automatically discharged into the sewage pipe.
8, automatic work: the whole system hydraulic automation operation, no need to special staff.
9. Energy-saving costs: The operating cost is low, and the operating cost is 20%-30% of the conventional power system.
10, long life: life expectancy of more than 30 years.
Equipment system (pump front suction or water pump rear suction) selection
1. Pump front suction system (this system is recommended system) a) The machine room ground is the same as the water level; b) the machine room ground is higher than the water level; c) the machine room ground bottom is not more than 1.2 meters in the water level.
2. Pump rear suction system (this system is more complicated than the former) a) The machine room floor needs to be 4.5 meters or more below the water level.
Later use and maintenance
1. The design area of ​​the machine room is small, and the civil engineering province
The traditional design ideas have many problems to be solved and the investment is large. Because the traditional pressure tank equipment needs to be placed underground, the design pressure tank is large, the floor space is large, the machine room is large, placed underground, bringing a series of problems such as seepage prevention, drainage, ventilation, lighting, etc., so that the cost and operation cost Increase accordingly.
Based on the principles of structure, hydraulics and physics, the company has designed and developed a new KLWT series product, which occupies less than one-fifth of the area of ​​the machine room of the traditional pressure tank system. The reason why the computer room area can be so small is because it changes the traditional design idea and no longer uses the pressure tank system. The automatic high-efficiency fine filter developed by the company has the characteristics of reasonable design and compact structure. The equipment can be placed above the ground level, so that the equipment room area is greatly reduced.
2, multi-layer fine filtration, high precision
The number of filter layers is up to seven layers, and the minimum particle size is 0.25~0.5mm, which effectively improves the dirt content and filtration precision of the filter layer, and the integrated water clarification tank makes the swimming pool circulating water treatment get rid of the investment. Adding flocculant becomes a reality. Not only greatly reduces the intensity and difficulty of the operator, but also avoids the water quality becoming an aqueous solution of flocculant (that is, the "syrup" of the swimming pool water, which is often said to be caused by excessive flocculating. The commonly used flocculants are Aluminum salt, too much will be acidic, acidic water will have adverse effects on some organs of the human body)
3, low operating costs
Not only is the initial investment reduced, but the current operating expenses are also greatly reduced, and the operating costs saved are even more substantial. The entire investment in the water treatment system can be recovered after 18 to 24 months of operation. And this all-plastic water treatment system requires no maintenance. There is no balance pool, no water pump sink, equipment can be placed above the ground level, so that the equipment room area is greatly reduced, the machine room can save hundreds of thousands of yuan.
Whether your excavator has recently rolled off the assembly line or has been a dependable part of your heavy equipment fleet for many years, JUHENG is sure to carry the exact replacement parts you need. We offer a huge assortment of brand-new Kobelco Excavator Parts, as well as dependable remanufactured parts that enable you to cut costs without sacrificing quality. Our inventory includes everything from piston pumps and buckets to engines for mini, small, medium and large excavators.
At JUHENG, we aim to offer our customers the best value-for-money aftermarket Kobelco Excavator parts, through competitive pricing and by only providing high quality, long-lasting spare parts.
Reduce your machine downtime, drive more efficient operations, and improve maintenance cycles with our wide range of Kobelco Final Drive , Kobelco Travel Motor , and Kobelco Travel Gearbox, Kobelco Drive Parts.
We provide parts for all makes and models of Caterpillar Excavators, from the 1-tonne 300.9D Mini Excavator, to the 100-tonne 390F L, as well as other brands such as Komatsu, CASE, Kubota, JCB, John Deere, Volvo, and many more.
Kobelco Final Drive,Kobelco Final Drive Assy,Kobelco Travel Motor,Kobelco Travel Gearbox,
With solutions available for over 170 Kobelco excavator models, we are sure to have the Kobelco final drive or travel motor you need.long-standing final drive provider.and 15 month warranty on final drives.
Kobelco Final Drive Spare Parts,Kobelco Drive Parts,Kobelco Motor
Kobelco Final Drive,Kobelco Final Drive Assy,Kobelco Travel Motor,Kobelco Travel Gearbox,Kobelco Final Drive Spare Parts,Kobelco Drive Parts,Kobelco Motor
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.juheng-cn.com