Gently sprinkle water after summer decoration tiles

A few days of hot weather caused Ms. Qin to have a headache. Since the new house was delivered a few months later, her new home was not renovated until the end of May. Ms. Qin is worried that hot weather will have no adverse impact on home improvement projects. Can you decorate under hot weather?

In response to Ms. Qin’s question, some people in the industry pointed out that the summer decoration does have a certain impact on wood, paint and other decoration materials. For example, after the timber enters the site, the moisture content is basically the same as the indoor environment. If the wood is placed in a sunny place in the case of high-temperature weather in the following days, the moisture of the wood will evaporate rapidly and cracking will occur. Even the woodworking part that has already been done will often have cracks and bulges due to the rapid loss of water.

The most effective way to solve this problem is to reduce the ventilation, so as not to drastically drain the moisture from the wood, but it is also not to be ventilated at all. This will make the carpentry part unable to get normal dryness. You can open the window halfway between morning and evening. It is an ideal state. In addition, the owners who select the summer decoration do not rush to drive the construction period. The woodworking part is aired for a day or two, and the wood at the sealing site is adapted to the changes in the environment. After the contraction is completed, the next process step will reduce problems. The probability.

In many owners' opinion, tiling is the easiest to construct, and it is the most worry-free part of all projects. As long as you find a good worker and follow reasonable procedures, there should be no problem. This is not the case.

In addition, the high temperature has a great impact on the bricklayer, because the high temperature weather will inevitably cause the rapid loss of water, and the rapid loss of moisture in the cement mortar will cause the cement mortar adhesion is not high, even if the pavement is no problem, if the weather is more Large, it is easy to produce empty drums.

Home-improvement experts pointed out that the most important thing for bricklayer construction in response to high-temperature weather is to do a good job of maintenance. No matter whether it is a tiling or ground leveling, in the latter part of the drying process, it not only needs moisture, but also needs to lock in moisture to ensure that moisture does not drain. That's good, so it's best to lightly sprinkle a layer of water on the leveling floor or tiled tiles every day. Some owners simply use a bucket of water directly on the ground for convenience. Excessive moisture will also affect the solidification of the cement mortar. It is necessary to make the floor wet, and it is impossible to collect water. This will last for three to five days. the best. Of course, if there is really no time, you can also cover the floor with a layer of cardboard and drench it with water, then open the window for ventilation and air dry naturally. If it is a wall construction, it is a good method to put some water on the wall and allow the wall to be fully wetted.

When it comes to the impact of hot weather on all aspects of home renovation, the biggest thing should be paint. “Hot weather will evaporate the water in the air, and when it comes to a paint surface that has not yet dried out, the dust in the air will easily adsorb on it, affecting the effect of brushing. If the dust falls into the paint, it is brushed. At the same time, the high temperature days also make the thinner in the paint volatilize faster, the paint is easier to crack and shell than other seasons.” Experts suggest that the paint should be properly moisturized in summer. Increasing the amount of thinner to make the wall slightly moister is an essential part.

It is also important to note that in summer, in particular, construction can not be rushed. High temperatures can quickly dry the surface of the paint layer. However, this is only an illusion. The interior of the paint layer is not dry, if you continue the second or third pass The construction of the paint surface, which may lead to the emergence of falling phenomenon, for latex paint, it is very likely not to have a dry moldy inside, there will be a mild smell, so adjust the attitude, do not rush to rush time is right The best response to hot weather.

Three trees paint paint cement home window new house tile adhesive

Round Rod

Round Rod,stainless steel round rod,fiberglass round rod,round metal rod

Jiangsu Minglu Stainless steel Co.,ltd , https://www.jsminglubolt.com