It is understood that in the current furniture market, wood furniture has become a major category in the furniture category due to its novel style, bright colors and clear wood grain. Coupled with the relatively modest price of the product, it is increasingly favored by consumers. Experts suggest that when consumers purchase wooden furniture, understanding and mastering the technical requirements and distinguishing the advantages and disadvantages of wooden furniture is an effective way to purchase wooden furniture correctly.
Round Garden Furniture Roland Furniture Dream Garden Furniture
Focus on surface quality
The wood-based panel furniture uses wood-based panels such as particleboard and medium-density fiberboard as substrates, and the surface is covered with melamine, PVC, wood veneer, and paper wood, and the imitation wood-grain pattern is clear and natural, smooth and smooth. , has a good visual effect and feel. When purchasing furniture, it mainly depends on whether the panels on the surface of furniture materials have scratches, indentations, blisters, debonds, and traces of glue.
Focus on production quality
In the manufacture of wood furniture, the formed plate is formed by combining a saw, a trimming edge, and a component assembly. Look at the production quality of wood-based panel furniture mainly depends on the quality of the saw, the quality of edge and face decoration and the quality of the port of the panel. There are quality requirements for flatness, verticality, and angle of the plate components in the saw. Generally speaking, the cutting technology of the plate is within 0.01 millimeters per meter. Well, after the furniture is made, there will be no plate tilt. The edge and surface decoration mainly depends on whether the coating is uniform on the decorative components, whether the bonding is firm, whether the trimming is smooth and smooth, and whether the end surface of the visible parts, such as a side panel, a door panel, a drawer panel, etc., is sealed or not. The traces of adhesion are not noticeable on the edges of the fine sheet metal. Assembling the assembly mainly depends on whether the drill hole is delicate and tidy, and whether the connecting piece is firm after being installed. After the plane is connected with the end face, there is no gap between the T-shaped joints, and there is no looseness by hand. Whether the gap between the door and the drawer is too large, the general requirement is between 1.5mm and 2.0mm, and whether the door and the drawer can be opened and pushed freely or not.
Note the quality of heavy metal parts and plastic parts
Wooden furniture often uses metal parts and plastic parts as fasteners, so the quality of metal parts also determines the quality of wooden furniture. Metal parts require dexterity, smoothness, good surface plating treatment, no rust, burrs, etc., and the precision of the fittings is high. The plastic parts should be beautiful in appearance, colorful, and the strength of the parts to be used must have strength and elasticity, and should not be too thin. The open-type connector requires flexible rotation, and the inner spring should be loosely fitted, so that the furniture will be smooth and easy to use without friction when it is opened.
Pay attention to the main size
Wood furniture is currently dominated by bedroom furniture and office furniture. There are also multi-functional film and television electrical cabinets and other products. The national standard of furniture's main dimensions (ie function size) has requirements. For example, the depth of space in the closet required by a large wardrobe shall be 530mm or greater, the distance between the upper edge of the hanging stick of the hanging coat and the upper surface of the bottom plate shall be equal to or greater than 1400mm, and the prescribed height of the table furniture shall be 680mm to 760mm, including the middle drawer of the writing desk. The clearance height between the lower edge and the ground should be greater than or equal to 580mm, and the clearance between bookcase floors should be greater than or equal to 230mm to 310mm. The above refers to the main dimensions, mainly refers to the purchase of furniture to pay attention to understand, because if the furniture is less than the required size, use will bring a lot of inconvenience, affecting the use of furniture. If the depth of the closet space is too small, it will affect the hanging of clothes, causing the door not to close.
Smelly wood
For the vast number of consumers, it is impossible to recognize all the solid wood timber, then we must remember the following points:
Take a look at whether or not the wood's ribs have a looped pattern or an arc-shaped arrangement of pinholes (tube holes). Check whether there is a straight line or curve between the layers of wood. If there is any such pattern, judge whether it is a panel. (Veneer veneer), because the real real wood has no beautiful lines other than rosewood and flowerwood.
Wenchun Purewood has its own special taste. Even after long-term storage or painting, it still has odor, and there are many woods that retain a faint taste. For example, pine wood has a rosin taste, cedar wood has a light fragrance, cedar has a spicy taste, and wood has The unique odor, beech wood will have a distinctly camphor-like taste. The eucalyptus wood has a slight oily odor. The mahogany incision will have a strong spicy aroma. The walnut wood will be slightly blown, and many domestic woods will have no odor. The board will have a very strong smell of chemicals, such as formaldehyde, trihydrammonium hydrogen, etc. will be well recognized.
Knocking on wood pieces by hand will produce a crisper sound, while the wood-based panel sounds low, and the wooden pieces of the box will slam drums.
掂 is divided into three levels according to the weight of the wood. Lightweight dried paulownia wood, middle and heavyweight pine, beech, autumn wood, etc., in the north of China, the medium-density wood is called soft miscellaneous wood (except for pine wood), heavyweight mahogany wood, Rosewood, rosewood and other hardwoods, beech wood, ash and birch, and imported Liuan wood are called hardwoods. In summary, the wood furniture is lighter than the particle board and medium density fiberboard furniture.
Furniture purchase furniture brand plate furniture wood furniture decoration space mahogany cypress wood furniture office bookcase armoire chest of drawers
Wenzhou Wuhuang Sanitary Ware Co., Ltd , http://www.chbasinfaucet.com