The price of public toilet partitions is mainly determined by the material and size of the partitions. Currently, there are four types of materials for public toilet partitions: artificial panel partitions, natural stone partitions, composite panel partitions, and plastic partitions. When designing sanitary partitions, Use the environment and use the crowd to determine the interval requirements. Following the small series to see the size of toilet partitions and toilet partitions for your reference.
Toilet partition size
Of course, there are many places that are not restricted by the area. In the case of large enough space, we should control the size of the toilet partitions. Xiaobian thinks that the size of the toilet partition at this time should be 1.2*0.9m. , but beyond a certain range, it will make people feel uncomfortable, for example, you engage in a 1.5 * 1.5m, not only a waste of space, but also makes people have a sense of insecurity.
Toilet partition minimum size
The toilet compartment separates an area for us to use, but in many places, the toilet area is small, but the large flow of people often leads to insufficient use of toilets, such as shopping malls, scenic spots, etc., so how can a few spaces be separated within a limited space? The toilet comes out of course? Of course, in an area where everyone can normally use the toilet to create more than a few partitions, then the minimum size of the toilet partition is generally not less than 0.8*0.9m, if less than this size, a bit fat It is difficult for a friend to turn around and cannot use the toilet very well.
Sanitary partition material selection
1, toilet partition decoration floor materials: sanitary partition design has safety requirements, the ground should be used with waterproof anti-slip and dirt-resistant characteristics of granite and other materials.
2. Toilet partition wall materials: The wall area of ​​the bathroom accounts for the largest proportion and must be made of strong water-repellent material with corrosion resistance and mildew resistance, such as tiles and marble that are easy to clean. Moreover, these materials have smooth surfaces that are easy to dry and are very suitable for use as sanitary partition wall materials, but it is necessary to pay attention to the harmony with the overall decorative effect.
3, toilet partition top material: the top surface long-term exposure to water vapor, very easy to mold, so use waterproof and heat-resistant materials. Most of them are made of colorful molded aluminum gussets and acrylic molded ceilings. These materials are very resistant to water and have a heat-insulating layer on the surface, making them ideal for bathroom ceilings. In addition, aluminum-plastic board or calcium silicate board is also used. The surface of calcium silicate board is coated with cement paint, which is low in price and strong in water resistance.
Sanitary break notices
1. Install the sewer pipe and install the floor drain before laying the floor tile.
2. Before making the partition, first spread the floor tiles and the wall tiles, and then make the toilet partitions according to the actual size. Because the upper and lower walls may have errors, the partitions made according to the actual size can be installed and used.
3. If there is no door frame, install a rocker to block the flow of water.
4. Try not to use the glide path, because the water and dust in the slide area are difficult to clean up, and if it takes a long time, it will become blocked and stink.
Editor's summary: The dimensions of toilet partitions and the precautions for toilet partitions are introduced here. For more information, you can follow this site information.
Toilet partition material
6 Hydrogen Peroxide,Hydrogen Peroxide,Food Grade Hydrogen Peroxide,5 Hydrogen Peroxide
Rucheng Sanxing Electric Chemical Co.,Ltd , https://www.3xchemical.com