construction
1, according to the requirements of the room and drawings made curtains box, if you do not directly install the curtain rod curtain box, in the installation of curtain rods, you should pay attention to the window frame and the length of the curtain rod thickness and length.
2. When making a panel curtain box, first make a 7-shaped frame pinned to the top, and both sides should be sealed with wood panels. The vertical border under the application of a 20 * 18mm wooden bar reinforcement, nailing, to prevent deformation, such as the re-sealed nails decorated with water, do mixed water paint must ensure that the grass-roots surface smooth.
3. When the window cover is made of block board or density board, the base board should be fixed on the keel of the window frame base and then nailed. The "zigzag" shaped nail prevents the curling of the line, the included angle should be dense and smooth, and the window cover The next mouth should use marble, so as to avoid deformation due to moisture.
4, the door cover should be made of wood frame, planing, planing straight, and then in the assembly molding installed on the wall, covering the base board and veneer.
acceptance
1. The door cover should be vertical, the veneer should be flat and square, and there must be no phenomenon of head and bell.
2. The cutting angles of wooden doors and window covers are neat, the joints are tight, the surface is smooth, there is no planing, and burrs.
Door and window acceptance window marble wooden door room paint
Silicone Promotion Gifts Co., Ltd. , http://www.siliconekitchenwares.com